Tuesday, February 1, 2022

1GM yanmar rebuild

 I rebuilt my yanmar 1GM diesel engine. If you have a 1GM , they don't sell the oversize piston and rings any more , so I decided to sleeve the cylinder. The 2GM is the same as the 1GM except that it has 2 cylinders instead of one and it has cylinder sleeves that can be replaced unlike the 1GM that is not sleeved. I purchased a 2GM cyl. sleeve and new piston and rings. I then had an engine rebuild shop bore my cylinder out to accept the new sleeve. It is not a press fit... the exact dimensions are in the shop manual. After having it bored for the sleeve I inserted the sleeve and rebuilt the rest of the engine...new valves , new bearings and seals and gaskets, new lift pump, new injector, and pre-combustion chamber, rebuilt high pressure pump, rebuilt water pump and anything else that needed done . Then I reinstalled it.

takeing engine out of basement shop

engine parts

1GM cyl. and 2GM sleeve 

engine tear down


Thursday, August 17, 2017

New Sails for Antares 2017

I ordered a sail kit for a new main sail and a 110 % jib sail from sailrite this past winter. They have a great staff and a great sail designer. He designed the sails I wanted and precut all the sail cloth for me. All I had to do is sew it all together. They turned out great and I saved a ton of money. I also bought a walking foot sewing machine and fitted it with sailrite sewing machine updates. These new sails perform much better than the old ones....If you are thinking about getting new sails, why not make your own, for about the price of used ones...



Tuesday, February 11, 2014

Mast raising system ... all you need is a hinge for the base of the mast  and an attachment on the forward side of the mast for the gin pole. Add a small boat winch to the top of the gin pole with a shive on the end. Also put a roller on the stern mast support so you can easily roll the mast back and place the upper half of the mast hinge into the lower part and secure it with  a large pin ( 3/4" X 6"bolt) . Place the gin pole on the post on the front of the mast and pin it in place. Now pull the cable out of the winch and attach it to the bow, then attach the jib halyard to the end of the gin pole. Now just crank up the mast and attach the forestay and the lower shrouds...tension them and you are ready to go...Takes about 15 or 20 minutes



Thursday, February 23, 2012

misc stuff




Here is some pics of new breaker box , AM FM radio inst., speakers...etc...

galley


I took out the teak deviders and replaced them with new black cherry cubords so I could put more stuff in there, and so it would be hidden. I also planto replace the drawer and cubord under the stove. I converted the alcahol   stove to propane last year.